Warning: Turn off Electrical
Instructions for Braiding
- First strip wires to be wrapped.
- Strip off about 1-1/2 inches of coating.
- If you have a ground wire leave 2 inches longer.
- For 2 wires place directly across for each other.
- For 3 wires place in every other hole.
- For 4 wires place 2 at top and 2 at bottom.
- For 5 wires place in a row + ground wire.
- Make sure tool rotates clockwise.
- Hold wiring with a pair of pliers on coating.
- Engage electric drill and braid.
- Run until all wire is thru the winder.
- Pull out and bend long ground with hole in braider.
- Cut off even with clippers and not the ground wire.
- put wire cap on end of wires.
Electronic Wire Braider
MFG: by Agr-star Int. Inc. *Copywriter
Winds up to 6 wires at a time
Wire Twister or Wire Braider
The Electricians Best Friend
Inquire for cost of Tool
